Review of Epoxyseal 9000 - The Epoxy Resin Store

Electronic Grade Potting Epoxy: the go-to resin for high-temperature resistance. Find out what they have to say about this epoxy.

⭐️⭐️⭐️⭐️⭐️Great. Worked better than anything else I have used. - erelectric

⭐️⭐️⭐️⭐️⭐️ electronic potting compound. good product - hillcountryente...

⭐️⭐️⭐️⭐️⭐️ Excellent product. 5star product - lord-tech2007

⭐️⭐️⭐️⭐️⭐️ Great product. I am a first time user and although this product is very good it could come with more specific,detailed instructions for using it. - amitabha-50

⭐️⭐️⭐️⭐️⭐️ Potting Epoxy. I use this epoxy to pot my HD Lightning vid kits. Which is the WORLD'S BEST CDI KIT for the CHINAGIRL Motorized Bicycle Engine kits - huffydavidson

⭐️⭐️⭐️⭐️⭐️  Works great. I needed to pot some boards for a commercial project. The stuff mixes easily, pours easily (just barely thinker than water) and is set up in 24 hours. No smell, no heat, it just works perfectly. - Michael St Denis

⭐️⭐️⭐️⭐️⭐️ Good product. Easy to use. - scanna70

⭐️⭐️⭐️⭐️⭐️ Good product. First time using this product. Worked great and very easy to use. Has a great finish. - m381956

 ⭐️⭐️⭐️⭐️⭐️ Good product. Good product, fast service. - NCpups

⭐️⭐️⭐️⭐️⭐️ That easy. When pouring in larger quantity. This stuff rocks. Mix it, and pour. That easy. When pouring in larger quantity, say more than a few ounces, be prepared to handle the heat it will produce, so that your container doesn't become distorted. I used approximately 1/3 of the contents to pot an antenna balun used in ham radio, and it did the job well, but... after a few minutes (less than ten), I had to put the balun container into a water bath... and even that began to steam up. So, please heed the heat warning. And... I used a small amount, maybe half an ounce, and it didn't have any problem with the heat, but naturally, took much longer, about two hours, to cure. The balun was rock hard 20 minutes. That's epoxy for ya! - Charlie B

⭐️⭐️⭐️⭐️⭐️ Great. Even when mixed hot it never produces heat. Awesome stuff. - Cory

⭐️⭐️⭐️⭐️⭐️ I love it. Works as good as all of the other brands I have used. Looks great and hardens well. About 24 hours for complete cure at room temp. - James R. Schings

⭐️⭐️⭐️⭐️⭐️ Long pot life, then gets hard quick. I've been casting about for a good encapsulant for some high voltage stuff. This may do, but according to amazon it's no longer available, yet I'm asked to review it. This is black and gets rock hard - you need a metal cutting bandsaw to chop it up. Whether that would cause tempco stress issues with the encapsulated parts, I don't know. - DCFusor

⭐️⭐️⭐️⭐️⭐️ Really nice potting compound. Works great. It dries very hard and smooth. - Bulldog Engineer

 

Epoxyseal 9000High temperature resistance epoxy

Leave a comment

All comments are moderated before being published