Let’s use Fusion Films to create a custom epoxy resin clock!

Here is how Shannon from @capturedintreasure used Fusion Films and epoxy resin to create a custom clock. 

 

 

Thank you for sharing your creative mind with us @capturedintreasure!


Fun Fact:  

Did you know there is a clock so accurate it won’t gain or lose a second in 20 million years? 

This is called an atomic clock. The NIST-F1 Cesium Fountain Clock was created by the National Institute of Standards and Technology in Colorado. It's used for internet time because it is so precise.

Welp, although our clock may need some adjusting once in a while, it's going to be beautiful! 😎


Please prepare the following:

  • Fusion Film 
  • Wooden clock (can be commonly found at a Dollar Store or Arts & Crafts Store local to you. It is a thin framed wooden blank clock. 
  • Liquid Diamonds
  • Rust-oleum metallic finish
  • Glitters
  • Alcohol ink

 

Step 1:

Spray rust-oleum on the wooden clock, and let it dry.

 

 

Step 2:

Tear the fusion film according to the proportions you prefer. 

 

 

Step 3:

Mix parts A & B of the Liquid Diamonds. This is a 2:1 mix ratio. Measure 2 parts of resin and 1 part of hardener by volume. Mix slowly for approximately 3-5 minutes. Thoroughly scrape the edges and bottom of the container. 

 

 

 

Step 4:

Pour the epoxy mixture. 

 

 

Step 5: 

Arrange the torn fusion films according to your preference. 

 

 

Step 6:

Apply glitters and pigment of your choice.

 

 

Step 7:

Allow it to cure for 24 hours at 75F.

 

 

 

 

 Step 8:

 Re-attach the clock mechanism, and you’re done!

 

 

 

I hope this was helpful.

 

Here is the demo video showing how it is done:

 

 

 

 

 

Let us know what you would like to create below in the comments.

 

**If you made it this far down, We occasionally pick the best comment to win a giveaway. -hint-hint

 

 

We created a handy comparison guide to help understand the different properties of our epoxy resin. Just follow this link here https://www.theepoxyresinstore.com/blogs/news/what-epoxy-resin-is-best-for-my-project

https://www.theepoxyresinstore.com/ is an expert manufacturer of various epoxy resins that can be used for both craft projects and industrial applications. We also offer colors, pigments, glitter, and other additives for various epoxy resin projects.

 

The Epoxy Resin Store
support@theepoxyresinstore.com
Phone: (951) 677-0400
Address: 540 Crane St suite A Lake Elsinore, CA 92530
https://www.theepoxyresinstore.com


Social Accounts:
https://www.facebook.com/TheEpoxyResinStore
https://twitter.com/epoxyresinstore
https://www.linkedin.com/company/the-epoxy-resin-store
https://www.youtube.com/channel/UC3NKcCrYL5uHK-sH5XMQ9HA 
https://instagram.com/theepoxyresinstore

 

Fusion filmLiquid diamonds epoxyWooden clock

2 comments

Tracy

Tracy

I bet it would be gorgeous with a picture background….

Verdonda

Verdonda

I have been wanting to try making a clock! This was actually very helpful! Thank you!

Leave a comment

All comments are moderated before being published

Trending products

Tumblers Coating Epoxy Resin Kit | Clear High Gloss UV Resistant Coating System - The Epoxy Resin Store Hardware Glue & Adhesives #Tumblers Coating Epoxy Resin Kit | Clear High Gloss UV Resistant Coating System - The Epoxy Resin Store Hardware Glue & Adhesives #
Tumblers Coating Epoxy Resin Kit | Clear High Gloss UV Resistant Coating System
Rated 4.8 out of 5
Based on 130 reviews
From $ 55
Polyaspartic 2 Part Flooring System - Non Yellowing Non Fading - The Epoxy Resin Store  #Polyaspartic 2 Part Flooring System - Non Yellowing Non Fading - The Epoxy Resin Store  #
Polyaspartic 2 Part Flooring System - Non Yellowing Non Fading
Rated 5.0 out of 5
Based on 3 reviews
$ 320 $ 339