Complete DIY Garage Floor Epoxy Kit – Covers 350 Square Feet

Transform your garage into a professional-grade showroom floor with our Complete DIY Garage Floor Epoxy Kit. This all-in-one system includes everything you need to coat and protect up to 350 square feet of concrete with a beautiful, durable flake floor.

Designed for homeowners and DIY installers, this kit makes it easy to achieve contractor-quality results without the contractor price.  This is the highest quality materials manufactured by a company 20+ years in the business - The Epoxy Resin Store, USA

Premium Decorative Flake System:

Built to Last

Our epoxy systems are formulated using high-performance industrial resins, giving your floor the durability needed to last for years.

When installed correctly, this system creates a seamless, high-strength coating that protects concrete while dramatically improving the appearance of your garage.

Easy to use:  All of the components are premeasured and ready to use.  Simply add the B bucket into the A bucket and mix.  You can mix by hand or use a drill with a paddle wheel.  

ALL ITEMS INCLUDED:

•  3 -  gallon kit 100% solid epoxy resin - tinted light gray. 
•  2 - gallon kit polyaspartic topcoat 
• (2) 18" rollers specifically designed for epoxy resin (no lint)
• 48" wood extension pole
• Wooster 18" roller frame
• Notched squeegee 8-12 mil 
• Concrete patch repair kit for cracks and voids 
• Plastic Spreader for patch repair
• Epoxy spike shoes
• Disposable Gloves (4 sets)
• 30 pounds of Torginol 1/4" Flakes

How to Install an Epoxy Flake Garage Floor

(DIY Installation Guide)

Step 1 – Prepare the Concrete

Proper surface preparation is the most important step for a long-lasting floor.

1. Sweep and vacuum the entire garage floor.

2. Remove oil, grease, or contaminants using a degreaser.

3. Mechanically grind the concrete using a floor grinder with diamond tooling.

4. Vacuum all dust thoroughly.

Goal: The concrete should have a clean, porous profile similar to 80–100 grit sandpaper.

---

Step 2 – Repair Cracks and Damage

Before coating, repair any defects in the concrete.

1. Fill cracks and joints with an epoxy crack repair or patching compound.

2. Allow repairs to cure.

3. Grind smooth if needed so the floor is level.

---

Step 3 – Apply the Epoxy Base Coat

1. Pour the mixed epoxy onto the floor in ribbons.

2. Use a notched squeegee to spread the epoxy evenly.

3. Back roll with a 3/8" lint-free roller.

Coverage:
Your kit covers approximately 350 square feet.

---

Step 4 – Broadcast the Decorative Flakes

Immediately after applying the epoxy base coat:

1. Grab handfuls of decorative flakes.

2. Toss them upward like feeding chickens.

3. Let the flakes fall naturally onto the wet epoxy.

Continue broadcasting until the entire floor is covered.

Your kit includes 30 pounds of Torginol Domino flakes (1/4"), which provide excellent coverage and create a beautiful decorative finish.

---

Step 5 – Allow the Floor to Cure

Let the epoxy cure before continuing.

Typical cure times:

• Light foot traffic: 12–18 hours
• Vehicle traffic: 48–72 hours

Temperature will affect cure time.

---

Step 6 – Scrape Excess Flakes

After the epoxy cures:

1. Use a floor scraper to remove loose flakes.

2. Scrape in multiple directions to knock down rough edges.

3. Vacuum all debris thoroughly.

This step creates a smooth and uniform surface.

---

Step 7 – Apply the Protective Topcoat

Finish the system with a clear protective topcoat.

1. Mix the clear coating according to instructions.

2. Apply with a roller evenly across the floor.

3. Allow to cure fully.

The topcoat seals the flakes and provides:

• chemical resistance
• abrasion resistance
• UV stability
• long-term durability

We offer full customer support and guidance 

 

All orders ship within 24 hours - During normal business hours. Shipping can take up to 5 business days depending on your location. We offer expedited shipping if needed.

Maximum transit times may take 10- 12 days for Hi, PR, and AK

No hassle returns - 60 day return policy