I cast gallons of resin and during a shortage of my main brand (Alumilite) I decided to try Clearcast because they had stock ready to ship! My resin arrived in a couple of days and I was delighted at the ease of use. I cast items that are 2-3" deep and this resin handled it perfectly! Easy to mix, low odor and cured perfect. I cannot comment on clarity as I mix mica powders in with all my resins. But I waited about a half hour after mixing to pour and my color separation was outstanding. I will definitely be buying more!!!
Clearcast 7000 is a crystal clear cycloaliphatic based epoxy system designed for high gloss coating & casting applications.
This resin sets up hard and crystal clear without any visible bubbles. Being a 1 to 1 mix and watery, it is easy to mix and pour. Use it for crafts to get high end results.
This epoxy system will cure rigid with a blush-free, shiny high gloss finish. Clearcast 7000 is approved for all applications and is excellent for crafts and decorative applications. This epoxy is easy to use at 1:1 mixing ratio.
- wood & metal coating
- jewelry making
- hobbyist and craft making
- plaques and frames
- concrete and pebble coating
- fiberglass wet lay-up
- waterproofing & sealing
- 1 to 1 mix ratio
- fast cure (24 hours @ room temp.)
- low viscosity at 600cps
- pot life of 45 minutes (150 grams)
- fast thin film set of 6 hours
- acid, chemical, & moisture resistant
- rigid, blush free, high gloss finish
- hardness shore - durometer scale D-70 (it's more pliable under warm conditions)
- heat resistant to 165F
- Tensile Strength, psi before cracking .... 6,500
You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.
Mixing Instructions will be included with the kit and can be found online by following this link here.
Not sure which epoxy resin is for you? Follow this link To review our comparison chart.
All prices are listed in USD.
All products are in stock and ready to ship.
Address: 540 Crane Street Unit A Lake Elsinore, CA 92530
Phone: (951) 677-0400
Hours of Customer Service: 8 AM - 4 PM (PST) Mon - Fri
Closed: Sat - Sun
We respond within 1 business day
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Excellent for boat deck waterproofing
After trying the B***o brand of polyester resin on part of my boat deck project, and struggling with several issues with it (the acrid fumes even with a respirator, thick viscosity, short pot life), I figured there had to be another way. I found Clearcast 7000 and bought the one-gallon kit. What an amazing product!
Mixed, it has the consistency of enamel paint. It can easily be poured out and brushed around with a bristle chip brush or a putty spreader, or the brush can be dipped into the mixture and painted on. It is thin enough to soak in to the wood somewhat, which is a real plus, but not so thin that it just runs everywhere. Note that the pot life I'm experiencing is about 30-40 minutes, after which it starts to thicken to the point of no longer being paintable...but I just mix my batch sizes accordingly, and 4-5 oz mixed volume seems about right.
My project is being done in an enclosed garage - in the winter - in Wisconsin - with the heater on. It is so great to have no fumes to speak of. It has a pleasant sweet/nutty aroma consistent with other 2-part epoxies that isn't offensive to me at all.
I am so glad I found this product!
I’ve order this 3 times now and absolutely love it.