Clearcast 7000 - Crystal Clear Epoxy Resin 2 Part Kit

Clearcast 7000 is a crystal clear cycloaliphatic based epoxy system designed for high gloss coating & casting applications.

This resin sets up hard and crystal clear without any visible bubbles. Being a 1 to 1 mix and watery, it is easy to mix and pour. Use it for crafts to get high end results.

This epoxy system will cure rigid with a blush-free, shiny high gloss finish. Clearcast 7000 is approved for all applications, coatings and castings. It is excellent for crafts and decorative applications. This epoxy is easy to use at 1:1 mixing ratio.

• wood & metal coating
• tabletops
• crafts
• jewelry making
• hobbyist and craft making
• plaques and frames
• concrete and pebble coating
• fiberglass wet lay-up
• waterproofing & sealing

• 1 to 1 mix ratio
• fast cure (24 hours @ room temp.)
• low viscosity at 600cps
• pot life of 45 minutes (150 grams)
• fast thin film set of 6 hours
• acid, chemical, & moisture resistant
• rigid, blush free, high gloss finish
• hardness shore - durometer scale D-70 (it's more pliable under warm conditions)
• heat resistant to 165F
• Tensile Strength, psi before cracking .... 6,500

You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.

Mixing Instructions will be included with the kit and can be found online by following this link here.

Not sure which epoxy resin is for you? Follow this link To review our comparison chart.