UV Protected Clear Epoxy Resin for Boat and Marine resin can withstand chemicals, acids, corrosion, rust, wind, salts, and of course, water.
Now with UV Additive (HALS).
What are HALS? Hindered amine light stabilizers (HALS) are chemical compounds that are added to assist with reflecting UV light.
HALS do not absorb UV radiation. This slows the degradation of the epoxy resin, ultimately reducing yellowing.
Due to our engineered mixture, marine guard 8000 UV cures much more rigid, and tougher than most epoxies on the market. Easy to use with a convenient 2:1 mix ratio.
You will receive epoxy and hardener & a complete instructions sheet.
Approved Applications:
- corrosion-resistant coatings
- marine-based applications
- tank lining
- watercraft building and repairs
- industrial and civil engineering
- concrete coatings
- weatherproofing
- Paddleboard coatings and repairs
- Boat Repairs
- Outdoor HIgh-Performance Boat use
- UV Protection
Advantages:
- No blushing and no chalking over time
- ease of use mix ratio (2:1) by weight or volume.
- chemical and moisture resistant
- low viscosity (800cps.)
- pot-life of 30 minutes.
- fast cure times of 24 hours.
- polyamide-based system with proven industry toughness
- 0% VOC's and almost no smell.
- HALS (Hindered amine light stabilizers) Reflect UV LIght
- customer support with every order.
- Tensile Strength, psi before cracking - 7500
Marine Guard 8000 waterproof epoxy layers easily with a fast 24-hour cure time.
Boat owners, repair professionals, builders, and artisans trust this boat resin for a quality waterproof layup.
From waterproof lining to new builds, crafting, and repairs, Marine Guard 8000 marine resin, chemical and moisture resistant with proven polyamide-based toughness, is the best boat resin for your watercraft.
Developed for toughness, crafted for beauty, this top-notch epoxy resin is ideal as a corrosion-resistant coating for marine applications, including boats, paddleboards, watercraft, tank linings, industrial and civil engineering, concrete coating, weatherproofing, and more.
With high UV protection and stability, trust Marine Guard 8000 for all your outdoor marine coating projects.
This easy-to-use marine epoxy resin will not blush, yellow, or chalk over time, is easy to use with a 2:1 mix ratio, low viscosity, pot life of 30 minutes, virtually no VOCs, and almost no smell.
You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.
1 GALLON PART A + 1/2 GALLON PART B = 1.5 GALLON KIT
Mixing Instructions will be included with the kit and can be found online by following this link here.
Not sure which epoxy resin is for you? Follow this link To review our comparison chart.
All prices are listed in USD.
All products are in stock and ready to ship.
Address: 540 Crane Street Unit A Lake Elsinore, CA 92530
Phone: (951) 677-0400
Email: support@theepoxyresinstore.com
Hours of Customer Service: 8:30 AM - 4:30 PM (PST) Mon - Fri
Closed: Sat - Sun
We respond within 1 business day